Weather device

Overview

The weather device is basically a set of sensors that you can obtain from your weather station.

Example

    async with XKNX() as xknx:
        weather = Weather(
            xknx,
            'Home',
            group_address_temperature='7/0/1',
            group_address_brightness_south='7/0/5',
            group_address_brightness_east='7/0/4',
            group_address_brightness_west='7/0/3',
            group_address_wind_speed='7/0/2',
            group_address_wind_bearing='7/0/6',
            group_address_day_night='7/0/7',
            group_address_rain_alarm='7/0/0'
        )
        xknx.devices.async_add(weather)

        await weather.sync(wait_for_result=True)
        print(weather)

Interface

xknx is the XKNX object.
name is the name of the object.
group_address_temperature KNX address of current outside temperature.
group_address_brightness_south KNX address for the brightness to south DPT 9.004.
group_address_brightness_west KNX address for the brightness to west DPT 9.004.
group_address_brightness_east KNX address for the brightness to east DPT 9.004.
group_address_wind_speed KNX address for current wind speed. DPT 9.005
group_address_wind_bearing KNX address for current wind bearing. DPT 5.003
group_address_rain_alarm KNX address for reading if rain alarm is on/off.
group_address_wind_alarm KNX address for reading if wind alarm is on/off.
group_address_frost_alarm KNX address for reading if frost alarm is on/off.
group_address_day_night KNX address for reading a day/night object.
group_address_air_pressure KNX address reading current air pressure. DPT 9.006 or 14.058
group_address_humidity KNX address for reading current humidity. DPT 9.007
sync_state Periodically sync the state.
device_updated_cb Callback for each update.

    async with XKNX() as xknx:
        weather = Weather(
            xknx,
            'Home',
            group_address_temperature='7/0/1',
            group_address_brightness_south='7/0/5',
            group_address_brightness_east='7/0/4',
            group_address_brightness_west='7/0/3',
            group_address_wind_speed='7/0/2',
            group_address_day_night='7/0/7',
            group_address_rain_alarm='7/0/0'
        )
        xknx.devices.async_add(weather)

        await weather.sync(wait_for_result=True)

        print(weather.humidity) # get humidity
        print(weather.ha_current_state()) # get the current state mapped as a WeatherCondition enum value. (for HA mainly)
        print(weather.wind_speed) # get the current wind speed in m/s